Christie 171-042107-02 User Manual

Loading ...

Configuring system settings

44Inspire Series User Manual

020-001934-02 Rev. 1 (01-2022)

Locking the lens motor

Prevent all lens motors from moving. It disables the zoom, focus, and offset settings, locking out

any changes and overriding all other lens features. This feature prevents accidental lens position

changes in multiple projectors installations.

1. Select Menu > Configuration > Lens Settings > Lock all Lens Motors.

2. To enable locking of all lens motors, select Locked.

3. To unlock all lens motors, select Allow.

4. To confirm the selection, press ENTER.

Resetting the lens to home position

Set the lens offset back to the home position.

1. Select Menu > Configuration > Lens Settings > Lens Calibration.

You can also press LENS on keypad or LENS H/LENS V on remote control.

2. To start the lens calibration, press ENTER.

3. To confirm the selection, select OK.

Selecting screen image orientation

Specify the orientation to use for the image. The projector supports front projection, rear

projection, front projection inverted, or rear projection inverted.

1. To invert the projection image, select Menu > Configuration > Ceiling Mount.

2. Select appropriate ceiling mount settings:

• Auto—Detect the orientation automatically.

• Off—Disable the ceiling mount setting.

• On—Enable the ceiling mount setting.

3. To confirm the image orientation, press ENTER.

4. To do a rear projection, select Menu > Configuration > Rear Projection.

5. To swap, press ENTER.

Adjusting on-screen display menus

Adjust various on-screen display (OSD) settings including the position, OSD transparency and

timing for OSD to disappear.

Loading ...

Christie 171-042107-02 DWU760-iS 7150-Lumen WUXGA Laser DLP Projector