Loading ...
Loading ...
Loading ...
8
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 5:
A: Attach Armrest (No. 31)
to the
Handlebar Post (No. 9) in place.
Secure it with 2 Spring Washers (No.
34) and 2 Hex Bolts (No. 35) using
Allen Wrench (No. 102). Finally attach
the Decorative Cover (No. 36) onto the
Armrest (No. 31).
B: Attach the 2
Handlebars (No.
32L/R) on the 2
Swing Bars (No.
24L/R) with 4 Carriage Bolts (No. 37),
4 Arc Washers (No. 14) and 4 Domed
Nuts (No. 33) using
Spanner (No.
104).
Note: If the Handlebar (No. 32L/R)
rubs against the Armrest (No. 31)
during the workout,
please recheck if
the Handlebar (No. 32L/R) is
assembled correctly. You should attach
Handlebar (No. 32L/R) to Swing Bar
(No. 24L/R)
according to the label
marked with L or R.
STEP 6:
Remove the preassembled 4 Phillips
Screws (No. 62) from the Meter (No.
108) with Spanner (No. 100).
Plug the Pulse Sensor Wire (No. 46) to
the jack on the back of the Meter (No.
108). Then connect the Upper Sensor
Wire (No. 15) to the wire from the
Meter (No. 108).
Attach the Meter (No. 108) to the
bracket of the Handlebar Post (No. 9)
using 4 Phillips Screws (No. 62) that
were just removed with Spanner (No.
100).
Note:
To avoid damaging the wires,
please push them into the Handlebar
Post (No. 9) before secure the Meter
(No. 108) onto the bracket.
THE ASSEMBLY IS COMPLETE!
Loading ...
Loading ...
Loading ...