Loading ...
Loading ...
Loading ...
23
Step 1. Steam Wand Descaling
- To start the Descaling Program turn the
DIAL to the
position.
The & LIGHTS will now start a
flashing combination once every few
seconds.
The Pump will start and hot water will run
from the Steam Wand. Over a 2 minute
period the Pump will make different noises.
When the hot water has stopped being
released from the Steam Wand, this step
has finished.
The flashing light combination will change
to the
& READY LIGHTS.
- Move to Step 2.
Important: In-between each of the
Descaling Steps there is a maximum of
5 minutes allowed to start the next step
before the Descaling Program will exit.
Step 2. Group Head Descaling
- To continue turn the DIAL directly to the
ONE CUP position (do not stop at the
ready position).
The
& READY LIGHTS will continue
a flashing combination once every few
seconds.
The Pump will start and hot water will run
from the Group Head. Over a 2 minute
period the Pump will make different noises.
When the hot water has stopped being
released from the Group Head, this step
has finished.
The flashing light combination will change
to the
& LIGHTS.
- Move to Preparing for Purge section.
Preparing for Purge
The Steam Wand and Group Head now
need to be purged clean with fresh water
to remove descaling solution.
• Rinse Water Reservoir
Remove the Water Reservoir & rinse
thoroughly under running water, ensuring
that all traces of the descaling solution
have been removed.
• Fill Water Reservoir
Fill the Water Reservoir to the 'MAX' line
with clean water and replace.
• Empty Containers
Empty water from the containers and
replace.
- Move to Step 3.
Step 3. Steam Wand Purge
- To continue turn the DIAL directly to the
STEAM position (do not stop at the ready
position).
The
& LIGHTS will continue a
flashing combination once every few
seconds.
The Pump will start and hot water will run
from the Steam Wand. Over a 2 minute
period the Pump will make different noises.
When the hot water has stopped being
released from the Steam Wand, this step
has finished.
The flashing light combination will change
to the
& READY LIGHTS.
- Move to Step 4.
Step 4. Group Head Purge
- To continue turn the DIAL directly to the
ONE CUP position (do not stop at the
ready position).
The
& READY LIGHTS will continue
a flashing combination once every few
seconds.
The Pump will start and hot water will run
from the Group Head. Over a 2 minute
period the Pump will make different noises.
When the hot water has stopped being
released from the Group Head, the
Descaling Program has finished.
Complete
The
LIGHT will be fully illuminated and
the READY LIGHT will flash to show the
Descaling Program has finished.
- Return the DIAL to the vertical READY
position.
- Empty water from the containers.
DESCALING: GROUP HEAD & STEAM WAND
Loading ...
Loading ...
Loading ...