Loading ...
Loading ...
Loading ...
7
• Guide Menu—This menu activates or de-activates autoguiding. Use the UP/DOWN buttons to choose from the following
three options:
• Auto Cal: NexGuide will start an auto-calibration routine prior to the start of autoguiding.
• Resume: NexGuide will immediately re-start autoguiding with the previous guiding parameters.
• Stop: NexGuide will stop autoguiding and return to the locked mode.
• Cross Menu—This menu displays the crosshair on the LCD screen. The center of the crosshair represents the center of
the image sensor. The crosshair can also be used to roughly calculate the positioning of a star in the field of view.
• Dec Backlash Menu—To reduce the affect of Dec axis backlash during autoguiding, the NexGuide can send a signal to
the Dec motors for a pre-determined time whenever the NexGuide reverses direction while guiding. When you select this
menu, the current setting is displayed on the left side of the LCD screen. Use the UP/DOWN buttons to change the value.
Press ENTER or LEFT to confirm. If your equatorial mount has no or minimal backlash, or if you have done very accurate
polar alignment, the Dec backlash should be set to 0.
GETTING STARTED
Loading ...
Loading ...
Loading ...