Loading ...
Loading ...
Loading ...
19
ENGLISH
Water dispenser
Cleaning the dispenser tank
Remove the dispenser tank approximately once a month
and wash it with water.
1
Empty the dispenser tank.
Push the lever and let out all water in the dispenser tank.
2
Remove the dispenser tank from the door.
1.
Take the both latches o.
2.
Lift the dispenser tank up to remove.
2
1
1
3
Disassemble the dispenser tank.
1.
Remove the cap.
2.
Remove the cover. (Latches : 5 pieces)
3.
Remove the tank pipe and the tank nozzle.
4.
Disassemble the tank nozzle.
2
2
2
2
2
1
2
2
2
3
3
4
Latch
Dispenser tank
Latch
Cover
Cap
Tank pipe
Tank nozzle
After cleaning
1
Assemble the dispenser tank.
(Reverse procedure to disassemble.)
Ensure that each parts are attached rmly. Otherwise
it may cause water leakage.
2
Install the dispenser tank.
Insert the dispenser tank fully and make sure to fasten
the latches to install.
2
2
3
2
3
1
3
Dispenser tank
Latch
Hook of the dispenser
tank
Put the hook on
the protrusion of
the door.
Tilt the latch
back.
Protrusions of
the door
Packing
Note
• When humidity is high, dew condensation may occur on
tank pipe and tank nozzle.
• Make sure not to lose the packing when you
disassemble the tank.
The dispenser tank must be installed to use.
Otherwise dew condensation may form on the
inside of the refrigerator.
1 2 3
Assemble the tank nozzle.
Loading ...
Loading ...
Loading ...