Loading ...
Loading ...
Loading ...
First Steps
3.
Attach toe griHHeto cabinet°
(somemodels)
To leve_ the cabinet using the front rollers:
] Remove the toe griHHe.
2 Use a flatobHade screwdriver or 3/8
inch socket wrench to raise or Hower
the front roHHers(Figure 2). Do not
9
raise the cabinet more than /16 inch,
Figure 2
or
Use adiustabHe wrench to adiust
leveling screws. Lower the HeveHing
screws on each side cHockwise untiH
they contact the floor (Figure 3). Do not
raise the cabinet more than 9/16inch.
Raise
Figure 3
NOTE
Raise the front of the refrigerator enough
so the doors chose freeHy when opened
halfway. The refrigerator shouHd sHope ]/4
inch to 1/2inch from frontoto-back, Then
HeveHthe refrigerator from side-to=side.
4 Some modeHs are equipped with an
antiotip bracket (Figure 4). Lower it
cHockwise untiH it contacts the floor.
Bracket
Figure 4 (some modeBs)
WARNING
The anfi-tip device must be
installed according to the
instructions in your Use &
Care Manual Failure to do
so will resu_ in in'ury.
_ WARNING
When reversing the door swing:
You MUST move the anti-tip bracket
to align with the hinges of the door.
Failure to do so will result in injury.
Loading ...
Loading ...
Loading ...