Loading ...
Loading ...
Loading ...
First Steps
7. Remove three screws on bottom hinge and
anti-tip bracket (if equipped) with 3/8"
socket wrench.
8. Remove toe grille support and screws (if
equipped).
9. Install bottom hinge and anti4ip bracket
(if equipped) on opposite side with the
three screws removed from step Z
10. Unscrew bottom hinge pin using adjustaMe
wrench. Move hinge pin to other hoUe in
hinge and tighten with adjustaMe wrench.
]t. Install toe grHUe support and screws on
opposite side (if equipped).
12. Reverse door handUes (see HandUe
Installation section).
13. Move freezer and refrigerator door stops
to opposite side. Before starting screws_
use an awU to puncture the foam.
14. Position refrigerator door onto bottom
hinge pin and screw center hinge pin
through center hinge into top of door. Close
refrigerator door to help align hinge hole.
15. Tighten center hinge pin with adjustable
wrench.
16. Remove cabinet and hinge hole plugs and
move to opposite side.
t7. Lower freezer door onto center hinge pin.
18. Close freezer door. Have an assistant
lift up on opposffe side of door while
tightening screws to install top hinge.
19. There are two toe grille covers provided in
your literature packet or already installed
on toe grille; one for the right side and
one for the left side. Install the appropriate
cover over the opening on the side opposite
the anfi4]p bracket_ (see Figures A & B).
NOTE J
In case of future door reversals_ save the toe
grille cover not being used.
20. Reinstall toe grille with appropriate cover
(some models).
2]. Plug in electrical power cord and turn
refrigerator temperature control to center
position. Adiust setting as necessary.
_ WARNING
When reversing fhe door swing:
You MUST move fhe anfi-fip brackef fo align
wifh fhe hinges of fhe door. Failure fo do so
will resuff in injury.
11
Door Stop
)or
Washer
ge
_Bottom
nge
OR
Toe
Grille
Support
Toe Grille Cover A
Loading ...
Loading ...
Loading ...