Loading ...
Loading ...
Loading ...
Putting the RS 5000 into operation
16 |
RS 5000
Charging the stethoset receiver’s rechargeable
battery
A complete charging cycle takes about 3 hours. Before using the
receiver for the first time, charge its rechargeable battery for a com-
plete charging cycle without interruption.
When the rechargeable battery is almost empty, the
Receiver status
LED lights up red and you hear 2 beeps in the stethoset receiver. The
Battery
LED on the transmitter lights up white. The stethoset
receiver switches off after a few minutes.
왘 Place the stethoset receiver into the transmitter’s charging com-
partment so that the volume buttons face upwards. The ste-
thoset receiver is magnetically oriented to the correct position.
The stethoset receiver automatically switches off and the
Bat-
tery
LED on the transmitter lights up white. The LED segments
display the charge status of the rechargeable battery. When the
rechargeable battery is fully charged, all LED segments light up
white.
3 h
100
%
+
3 h
100
%
Battery LED Meaning
– The transmitter is not charging.
1
st
LED segment flashes
The rechargeable battery is being
charged. Less than one-third of the
charge capacity is reached.
1
st
LED segment lit
2
nd
LED segment flashes
The rechargeable battery is being
charged. Up to one-third of the
charge capacity is reached.
1
st
+ 2
nd
LED segments lit
3
rd
LED segment flashes
The rechargeable battery is being
charged. Up to two-thirds of the
charge capacity is reached.
All LED segments lit
The rechargeable battery is fully
charged.
Battery
LED flashes
rapidly
A charging error/battery error has
occurred (see page 28).
Loading ...
Loading ...
Loading ...