Loading ...
Loading ...
Loading ...
ninjakitchen.co.uk
ninjakitchen.co.uk
CARE & MAINTENANCE
CLEANING
Blades can still operate when the lid is removed. Always turn the unit OFF when cleaning without the lid on
or when the BlastBlade Assembly is exposed.
Hand-Washing
Wash vessel, lid, and BlastBlade Assembly in warm, soapy water. Use a dishwashing utensil or cloth to clean
the BlastBlade Assembly on the motor base. Exercise care when handling the BlastBlade Assembly on the
motor base as the blades are sharp. Wipe the motor base with a clean, damp cloth. DO NOT submerge the
motor base in a water. Thoroughly rinse and air-dry all appropriate parts.
Motor Base
The USB-C port is water resistant, which means the motor base can get rinsed in the sink; HOWEVER
DO NOT put the motor base in the dishwasher or submerge it in water. Ensure the USB-C charger is not
inserted before cleaning.
DEEPER CLEAN
Dishwasher
Vessel and sip lid are top-rack dishwasher safe. DO NOT use a heavy cycle. Ensure the vessel and sip lid
are removed from the motor base before being placed in the dishwasher.
STORING
Store the unit upright and with the vessel attached to the blade assembly.
DO NOT store blended or unblended ingredients in the vessel with the BlastBlade Assembly for
prolonged periods of time.
DO NOT stack items on top of the vessel. Store any remaining attachments alongside the unit or in a
cabinet where they will not be damaged or create a hazard.
If your unit needs servicing, call Customer Service at 0800 862 0453. So we may better assist you, please
register your product online at
www.ninjakitchen.co.uk/register-guarantee
and have the product on
hand when you call.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, visit ninjakitchen.co.uk
USING THE BLENDING VESSEL
IMPORTANT: Review all warnings at the beginning of this Owner’s Guide before proceeding.
1 Ensure the motor base is fully charged and the vessel is properly installed
by aligning vessel arrow with motor base arrow located on the back of the
motor base.
INSTALLING VESSEL CAP AND BLADE COVER
After blending is complete, ensure the lid is on tight and turn the blender upside down. Twist anti
clockwise to remove the motor base from the vessel. Install the flat lid on the bottom of the vessel
and turn clockwise.
Install the blade cover on the motor base to cover the exposed blades by twisting anti clockwise.
2 Turn unit ON by pressing the
button until Start/Stop button
lights illuminate.
3 Add ingredients, starting with liquids to the MIN LIQUID line then
solid ingredients. If using ice, always add last. DO NOT fill ingredients
past the MAX FILL line. Secure lid onto the vessel, twisting clockwise
to tighten.
4 Blend for a 30-second blend cycle by pressing the Start/Stop button.
5 Open the sip lid to sip, or remove the lid to pour out blender outputs
into another container. DO NOT remove vessel from motor base when
filled. Empty vessel prior to removing from motor base.
6 After blending, power OFF the unit by pressing the
button.
Motor base should be turned OFF when drinking from the sip lid
and when blender is no longer in use.
7 Refer to the Care & Maintenance section for cleaning and
storage instructions.
Loading ...
Loading ...
Loading ...