Loading ...
Loading ...
Loading ...
ninjakitchen.co.uk
ninjakitchen.co.uk
PARTS
A Sip Lid
B Carry Handle
C Blending Vessel*
D Vessel Cap*
E Blade Cover*
F Motor base with BlastBlade Assembly
G USB-C Charging Cord
H Charging Port
1 Remove all packaging materials from the unit. Exercise care when unpacking blade assembly, as the
blades are sharp.
2 Wash vessel, lid, and blade assembly in warm, soapy water using a dishwashing utensil with a handle
to avoid direct contact with the blades. DO NOT submerge the motor base in water when cleaning.
Exercise care when handling blade assembly, as the blades are sharp.
3 Thoroughly rinse and air-dry all parts.
BEFORE FIRST USE
IMPORTANT: Review all warnings at the beginning of this Owner’s Guide before proceeding.
NOTES:
• Handle the BlastBlade Assembly by grasping around the motor base.
• All attachments are BPA free. All attachments EXCEPT the motor base are top-rack dishwasher
safe. DO NOT use a Heavy cycle. Ensure lid and vessel are removed from motor base before
placing in the dishwasher. Exercise care when handling BlastBlade Assembly.
USING THE CONTROL PANEL
PROGRAMS:
START/STOP BUTTON
Press Start/Stop button once to activate the 30-second blend cycle.
POWER BUTTON
Press Power button to turn unit ON and OFF.
ERROR STATES LED Shows Solutions
Vessel and Base are
Not Aligned
Flashing WHITE
Ensure vessel and motor base are
aligned using the arrows on the
back of motor base and vessel.
Blades are Blocked Flashing ORANGE
Move lodged ingredients from
blade & re-start blend program.
Requires Charge Solid RED Charge unit.
Abnormal charger Flashing RED and BLUE
Defective charger, unplug & find
correct 5V 3A charger
Unit Cool Down
Time Out
Clockwise Moving ORANGE LEDs
Let unit sit at room temp for
15 minutes before using again.
While Charging Flashing WHITE and RED Call Customer Service.
While Blending
Flashing RED in bottom left
and top right
Call Customer Service
* Blending vessel sizes and quantity, and accessories
vary by model.
CHARGING:
Charge the unit for at least 2 hours for a full
battery. LEDs will illuminate GREEN when fully
charged.
Charging port is located at the back of the
motor base. Use provided USB-C charging cord
with a 5V 3A Power Supply.
B
A
F
H
C
D
E
G
Motor Base
Back
Loading ...
Loading ...
Loading ...