Loading ...
Loading ...
Loading ...
Navigating Between Modes
Each press of (C) cycles between watch
modes.
●
In any mode, hold down (C) for at least two
seconds to return to the Timekeeping
Mode.
●
Pressing (D) in the Timekeeping Mode
starts a Stopwatch Mode elapsed time
measurement operation.
l
Starting Time Measurement Directly
From the Timekeeping Mode
CC
CC
C
C
Dual Time Mode
Timekeeping Mode
Data Recall Mode
Stopwatch Mode
Timer Mode
Alarm Mode
Cycling Between
Timekeeping Mode Digital
Display Contents
Each press of (A) in the Timekeeping Mode
cycles the display information as shown
below.
Month, day, day of
the week
Hour, minute, second
Shifting Hands to Read the
Digital Display
Hand shift moves the hands out of the way for
easy viewing of display information.
1. Press (L) and (C) at the same time.
●
This will shift the analog hands to allow
easy viewing of display information.
2. To return the hands to their normal
timekeeping positions, press (L) and (C)
at the same time again.
Note
●
If you leave the watch with its hands
shifted and do not perform any
operation for about one hour, the
hands will resume normal timekeeping
automatically.
Viewing the Face in the Dark
The watch has an LED light that you can turn
on for reading in the dark.
●
To illuminate the face manually
Press (L) to turn on illumination.
●
Illumination will turn off automatically if an
alarm starts to sound.
●
To illuminate the face when Auto Light
is enabled
If Auto Light is enabled, face illumination will
turn on automatically whenever the watch is
positioned at an angle of 40 degrees or more.
40
degrees
or more
Important!
●
Auto Light may not operate properly
when the watch is at a horizontal angle
of 15 degrees or greater from
horizontal as shown in the illustration
below.
●
Electro-static charge or magnetism
can interfere with proper auto light
operation. If this happens, try lowering
your arm and then angle it towards
your face again.
●
When moving the watch you may note
a slight rattling sound. This is due to
operation of the auto light switch,
which determines the current
orientation of the watch. It does not
indicate malfunction.
Watch Operation Guide 5692
7
Loading ...
Loading ...
Loading ...