Loading ...
Loading ...
Loading ...
14
THE DISPLAY CONSOLE
RIGHT WINDOW DISPLAY
The treadmill will start after a 3 seconds countdown.
1. PROGRAM: In addition to manual mode, there are 10 preset programs (P1-P10) and 3 user
programs (U1-U3).
2. SPEED: The speed range is 0.6-6.2 MPH (1.0 – 10 KM/H). The initial default speed is 0.6 MPH
(1.0 KM/H).
3. TIME: Displays the elapsed running time or countdown time (0:00~99:59 MIN). Once the time
has elapsed past 99:59 MINS, you may press the + key to reset it back to 0:00.
4. DISTANCE: Displays the total distance traveled or distance countdown (0.00-99.9 MILES)
/(0.00-99.9 KM).
5. CALORIES: Displays total calories burned or calories countdown (0.0-999.9 KCAL).
Convert from Imperial System to Metric System:
First, remove the Safety Key (No. 50) from the console then press “2” and “4” MPH buttons
together for 5 seconds. The display will show “10.0” or “6.2”. For Imperial System (MPH),
return the Safety Key (No. 50) to the console when “6.2” is displayed. For Metric
system(KM/H), return the Safety Key (No. 50) to console when “10.0” is displayed”.
Note: If treadmill is converted to Metric System, speed and distance will be measured in Kilometers
and Kimometers/Hour.
FUNCTION KEYS/MANUAL MODE:
1. START/STOP: Insert the Safety Key (No. 50) into the top console. Press the START/STOP
button to start the treadmill. When the treadmill is running, press this button once to pause
and twice to stop the treadmill.
2. PROG (PROGRAM) BUTTON: Press the PROG button to select a program when in standby
mode.
3. MODE: Press the MODE button to choose which Countdown Mode to preset before starting
the treadmill.
4. SPEED +/- BUTTON: During use, use the +/- buttons to increase or decrease your speed.
5. 2 MPH, 4 MPH (QUICK SPEED BUTTONS): Use these quick speed buttons to instantly
bring the running belt to the desired speed of 2 MPH, 4 MPH. If the treadmill is converted to
Metric System, the quick speed buttons will display and run 2 KM/H, 4 KM/H.
6. SAFETY KEY: The Safety Key (No. 50) acts as an emergency stop function. In case of
emergency, simply remove the Safety Key (No. 50) from the console. The console will beep
twice and bring the running belt to a complete stop.
Loading ...
Loading ...
Loading ...