Loading ...
Loading ...
Loading ...
9
ENGLISH
Indexing the Chisel Position (Fig. A)
The chisel can be indexed and locked into
24differentpositions.
1. Rotate the mode selector dial
4
until it points towards
the position.
2. Rotate the chisel in the desiredposition.
3. Set the mode selector dial
4
to the “Chipping”position.
4. Twist the chisel until it locks inposition.
Mode Selection (Fig. A)
WARNING: Do not select the operating mode when
the tool isrunning. Tool must come to a complete stop
before activating the mode selector button or damage
to the tool mayresult.
Your tool is equipped with a mode selector dial
4
to
selectthe mode appropriate to desiredoperation.
Symbol Mode Application
Chisel
Adjustment
Chisel position
adjustment
Chipping
Light chipping, chiseling
and demolition
To Select a Mode
• Rotate the mode selector dial
4
so that the arrow points
to the symbol corresponding for the desiredmode.
NOTE: The arrow on the mode selector dial
4
must be
pointing at a mode symbol at all times. There are no operable
positions inbetween.
Electronic Speed and Impact Control
(Fig. A)
The electronic speed and impact control allows the use of
smaller chisels without the risk of chisel breakage, chipping
into light and brittle materials without shattering and
optimal tool control for precisechiseling.
Wireless Tool Control™ (Fig. A)
CAUTION: Read all saftey warnings, instruction and
specifications of the appliance which is paired with
thehammer.
Your hammer is equipped with a Wireless Tool Control™
transmitter which allows your hammer to be wirelessly
paired with another Wireless Tool Control™ device, such as a
dustextractor.
To pair your hammer using Wireless Tool Control™, press and
hold the trigger switch
1
on the hammer and the Wireless
Tool Control™ pairing button on the seperate device. An LED
on the seperate device will let you know when your hammer
has been successfullypaired.
DeWALT Bluetooth® Tool Tag Ready (Fig. A)
Optional Accessory
WARNING: Read instruction manual for the DeWALT
Bluetooth® ToolTag.
WARNING: Remove battery from tool before installing
the DeWALT Bluetooth® ToolTag.
WARNING: When installing or replacing the DeWALT
Bluetooth® Tool Tag, use only the screws provided. Be
sure to securely tighten thescrews.
Your tool comes with mounting holes
11
and fasteners
12
for installing a DeWALT Bluetooth® Tool Tag (DCE041). You will
need a T15 torx bit tip to install the tag. Screw torque should
be between 0.8 and 1.2 Nm (7.1 to 10.6 in-lbs). The DeWALT
Tool Tag is designed for tracking and locating professional
power tools, equipment, and machines using the DeWALT
Tool Connect™ app. For proper installation of the DeWALT
Tool Tag, refer to the DeWALT Tool Tagmanual. To learn
more,visit:
www.DeWALT.com/en-us/jobsite-solutions/tool-connect
SHOCKS Active Vibration Control®
System
For best vibration control, hold the tool as described in
Proper Hand Position and apply just enough pressure so the
damping device on the main handle is approximately mid
stroke. The hammer only needs enough pressure to engage
the active vibration control. Applying too much pressure will
not make the tool actuate faster and active vibration control
will notengage.
Proper Hand Position (Fig. G)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
suddenreaction.
Proper hand position requires one hand on the bail/
loop style auxiliary handle
2
with the other hand on the
mainhandle
5
.
NOTE: For best results, make sure your battery pack is
fullycharged.
To install the battery pack
8
into the tool handle, align the
battery pack with the rails inside the tool’s handle and slide it
into the handle until the battery pack is firmly seated in the
tool and ensure that it does notdisengage.
To remove the battery pack from the tool, press the release
button
9
and firmly pull the battery pack out of the tool
handle. Insert it into the charger as described in the charger
section of thismanual.
To set the speed dial
10
, turn the dial to the desired level.
The higher the number, the greater the speed and impact
energy. Dial settings make the tool extremely flexible and
adaptable for many different appli cations. The required
setting depends on the chisel size and hardness of material
beingchipped.
Loading ...
Loading ...
Loading ...