Loading ...
Loading ...
Loading ...
Troubleshooting
Keypad
LED screen Possible faults Possible solutions
The error LED flashes. Overload The cutting attachment cannot move
freely. Release the cutting attach-
ment.
Temperature deviation Let the product cool down.
The product does not start. Push the power trigger and press the
start button at the same time.
Release the power trigger and stop
the product.
The error LED comes on with red
light.
It is necessary to do servicing on the
product
Speak to your service dealer.
Battery
LED display
Possible faults Possible action
The green LED flashes. Low battery voltage. Charge the battery.
The error LED flashes. Temperature deviation. Use the battery in temperatures between
-10°C (14°F) and 40°C (104°F).
Too much voltage. Make sure that the mains voltage aligns with
the voltage stated on the rating plate of the
product.
Remove the battery from the battery charger.
The error LED is on. Cell difference is too much (1V). Speak to your servicing dealer.
Battery charger
Problem
Possible faults Possible solution
The charging LED is red. Permanent battery charger error. Speak to your dealer.
The charging LED flashes green. Temperature deviation, the battery is
too cold or too hot to use or charge.
Let the battery cool down or warm it
up. When the battery has the correct
temperature, it can be used or charg-
ed again. Use the battery charger in
ambient temperatures between 5 °C
(41 °F) and 40 °C (104 °F).
The charging LED flashes red. Faulty battery. Speak to your dealer.
16 1737 - 003 - 11.10.2022
Loading ...
Loading ...
Loading ...