Loading ...
Loading ...
Loading ...
Door Removal and Reversal Instructions
Top
Hinge
rqH_
Hinge
Screw
ToolsNecessory:
Phllllm= heod
of
QMQdrox "IOQQ
screwddver WrenchSet
Adjustable
'_kench
Screws Top Hinge
Cover
I__ Top Hinge
Cabinet Ho
Plugs
Hinge Hole = _ Handle Hole
Door
Hinge
Pin
Canter
Handle
Hole
i kugs
Door Stop Door
Screw. _ Stop
"_ Washer
_ / Toe Grille
DOOR REMOVAL AND REVERSAL INSTRUCTIONS:
NOTE: The direction inwhich your refngerator doors open (door swing)
can be reversed, from left to right or right to left. by moving the door
hinges from one side to the other. Reversing lhe door swing should be
performed by a qualified person.
IMPORTANT: Before you begin, turn the refrigerator temperature control
to "0" and remove the electrical power cord from the wall outlet. Remove
any food from door shelves.
1. Remove toe grille and top hinge cover.
2. Remove top hinge with 3/8" hex driver and lift freezer door off of
center hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable wrench and save for
reassembly. Ensure olastic washer stays on hinge pit
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw and
loosening two outside screws enough to allow hinge and shim to
slide out. Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator, remove
inside screw and installcenter hinge.
7. Remove bottom hinge with 3/8" hex driver. Reinsert two outside
screwsin holes and tighten. Inside screw will go to opposite side
in steo 8
8. Remove two outside screws on opposite side of refrigerator and
install bottom hinge. Insert and tighten screw saved from step 7.
9. Unscrew bottom hinge pin using adjustable wrench. Move hinge Dm
to other hole in hinge and tighten with adjustable wrench.
10. Reversedoorhandles see instructionson next page).
11. Move freezer and refrigerator door stops to opposite side. Before
starting screws, use an awl to puncture the foam.
12. Position refrigerator door onto bottom hinge pin and screw center
hinge pin through center hinge into top of door. Close refrigerator
door to help align hinge hole.
13. Tighten center hinge pin with adjus[able wrench.
14. Remove cabinet and hinge hole plugs and move to opposite side.
15. Lower freezer door onto center hinge pin.
16. Close freezer door. Have an assistant lift up on opposite side of
door while tightening screws to installtop hinge.
17. Replace toe grille and top hinge cover.
18. Plug in electrical _ower cord and turn refrigerator temperature control
to center position. Adjust setting as necessary.
Loading ...
Loading ...
Loading ...