Loading ...
Loading ...
Loading ...
81
Result
According to the configured rules, when a boat is detected crossing the rule line or area, an alarm is
triggered, and the Camera performs linkage actions.
Click the
Alarm
tab on the main page, and then select
IVS
. When an alarm is trigged, you can view
the details on the
Alarm
page.
5.6.6 Configuring Global Setup
Enable the
Boat Info Display
function on the
Global Setup
page.
Step 1 Select
Setting
>
Smart Thermal
>
Boat Detection
>
Global Setup
.
Step 2 Select a preset.
Step 3 Select the
Boat Info Display
checkbox, and configure the sensitivity.
Boat information such as length, height, distance and speed will be displayed on the live
page.
Make sure that you have finished boat calibration; otherwise boat information such as
length, height, distance and speed are displayed as 0. For details, see "5.6.7 Configuring
Boat Calibration".
Figure 5-49 Global setup
5.6.7 Configuring Boat Calibration
According to calibrated ruler and its corresponding actual distance, determines the relationship
between the two-dimensional image obtained by the device and the three-dimensional real object.
Prerequisites
Before calibration, make sure that you have selected the reference object with known length and
parallel to the ground.
Procedure
Step 1 Select
Setting
>
Smart Thermal
>
Boat Detection
>
Global Calibration
.
Step 2 Select a calibration object, and configure the parameters.
1. Configure the installation height, calibration distance, and calibration object length.
Table 5-11 Parameter description
Parameter Description
Installation Height The distance between the Camera and the ground.
Loading ...
Loading ...
Loading ...