Loading ...
Loading ...
Loading ...
105
Parameter Description
Shutter
When selecting
Manual
or
Shutter Priority
in
Mode
, you can set Shutter.
Set the effective exposure time. The smaller the value, the shorter the
exposure.
Basic NR
Select the
On
checkbox to enable this function. Aiming at single-frame
image, 2D NR averages the pixel points (points that are with image noise)
with other common pixel points to decrease the image noise and achieve
an acceptable and good image display effect. The higher the grade, the
better the noise suppression effect.
Advanced NR
Select the
On
checkbox to enable this function. Aiming at multiple-frame
image, 3D NR handles information between two frames to reduce the
image noise. The higher the grade, the better the noise suppression effect.
Grade You can select the grade from
Low
,
Medium
, and
High
.
Step 5 Click
Save
.
6.1.1.1.3 Configuring Backlight Parameters
You can select backlight mode from Off, BLC, WDR, and HLS.
Step 1 Select
Setting
>
Camera
>
Conditions
>
Conditions
.
Step 2 Select
1
in
Channel
.
Step 3 Click the
Backlight
tab.
Step 4 Configure backlight parameters.
There might be a few seconds of video loss when the Camera is switching to WDR mode
from other modes.
Figure 6-4 Backlight
Loading ...
Loading ...
Loading ...