Loading ...
Loading ...
Loading ...
EN - 11
EN
To reset the manufacturer's original
settings, press the keys at the same
time for at least 10 seconds. All of
the keys ash at the same time and
the machine emits a single sound
indicating that factory settings have
been reset.
5 Machine settings
The programming menu can be used to set:
- Auto power-off time (Stand-by)
- Water hardness
- Coffee temperature
- Pre-brewing proles
To access the programming menu, press keys
(11) and (14) at the same time for 5 seconds.
All of the keys ash simultaneously.
• To make the settings relative to the auto
power-off times, press the key (11).
• To set the level of water hardness, press the
key (12).
• Press key (13) to set the extraction
temperature.
• To set the desired pre-brewing times, press
the key (14).
Auto power-off time
After approx. 5 minutes of no use, the machine
goes into Eco mode.
Proceed as follows to change this setting:
• Access the programming menu as indicated
previously.
• Press the key (11), it will ash 3 times to
indicate selection.
• The current setting is shown with the keys
switching on, as shown in the following
table:
Key
Auto power-off time
set
11 Eco Mode (10 minutes)
11.12 30 minutes
11,12,13 40 minutes
11,12,13.14 60 minutes
• Press the key corresponding to the desired
setting to modify the time, as indicated in
the table.
Key
Auto power-off time to be
set
11 Eco Mode (10 minutes)
12 30 minutes
13 40 minutes
14 60 minutes
• The key selected will ash 3 times and a
sound will be emitted (if the acoustic signals
are active) to indicate the setting has been
saved.
Use
Loading ...
Loading ...
Loading ...