Loading ...
Loading ...
Loading ...
ENGLISH
14
Cleaning
WARNING: Never use solvents or other harsh
chemicals for cleaning the non‑metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into aliquid.
CAUTION: Blender guard, food chopper cylinder, food
chopper blade shaft, food chopper liquid port cover,
whisk, hand mixer beaters, mixing cup, and mixing cup
lid are top rack only, dishwasher safe using "normal"
dishwasher setting. It is recommended that you
manually rinse before placing them in the top rack of
the dishwasher.
1. Remove the attachment from the motor
6
as detailed in
the Installing and Removing Attachments section.
2. Blender guard, food chopper cylinder, food chopper
blade shaft, food chopper liquid port cover, whisk,
hand mixer beaters, mixing cup, and mixing cup lid
are dishwasher safe (top rack only) using "normal"
dishwasher setting. For all other attachments and
components, clean by hand with a cloth and warm,
soapy water.
3. Ensure the attachment or component is dry
beforereinstalling.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and keep away from power
button before making any adjustments or
removing/installing attachments or accessories.
An accidental start‑up can causeinjury.
Your BLACK+DECKER appliance has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper appliance care and regularcleaning.
Troubleshooting
Unit not running: Place the appliance on the charger until
all LEDs are on and solid. Then try using the unitagain.
Splatters food outside container: Adjust the
variable‑speed dial. Start with the speed on the lowest
setting to prevent making a mess and adjust to higher
speeds as ingredients become well mixed, and as you feel
more comfortable with thespeed.
If unit is not charging:
• Ensure the charger is plugged in.
• Wipe down the charging pegs on the appliance as well
as the charger connector. Use a cloth dampened only
with water and mildsoap.
• Temperature fault or overcurrent conditions may
haveoccurred.
‑ Temperature fault: LEDs will blink in the following
pattern ‑ . ‑ . (250 ms ON, 250 ms OFF, 10 ms ON, 250
msOFF).
‑ Overcurrent: unit will shut down with noflashing.
‑ Refer to the Hot/Cold Delay section for
moreinformation.
WARNING: Ensure the whisk pole is assembled to the adaptor
and that the adaptor is assembled to the motor as detailed in
the Installing and Removing Attachmentssection.
NOTE: Do not use the whisk
35
with nonstick cookware as
it may scratch or mark nonstickcoatings.
Whisking (Fig.Q)
1. Place ingredients to be whisked into abowl.
NOTE: To incorporate air into the ingredients when whisking,
use a deep and wide container and move the whisk
35
in
gentle up‑and‑down and side‑to‑sidemotions.
2. Immerse the whisk completely in the ingredients, to the
bottom of thecontainer.
3. Set the variable‑speed dial
4
to 1and increase speed by
turning the dial asdesired.
NOTE: If selecting a higher speed, it is recommended that
you start on low speed and then increase to high speed to
avoid splattering and overprocessing.
4. Turn the unit on as described in the On/Off section. Do not
remove whisk from bowl while motor
6
isrunning.
5. Whisk ingredients by moving the appliance slowly up
and down and in circles. Do not remove whisk fromfood.
6. If your whisk becomes blocked:
‑ Turn unit off while keeping the whisk submerged,
‑ Lift whisk out of the container,
‑ Disassemble the whisk and whisk adaptor
37
from the
motor by turning the adaptor counterclockwise,
‑ Remove blockage,
‑ Securely reattach the whisk andadaptor.
IMPORTANT: The continuous operating time must be less
than 2minutes. Never whisk hot oil, fat, ormeat.
7. After you have completed whisking, release the unlock
button
2
and power button
3
to stop the motor.
8. Ensure the motor has completely stopped before lifting
the whisk out of thecontainer.
9. After use, pull the whisk from the adaptor and remove
the adaptor from the motor by turning the adaptor
counterclockwise.
10. Clean the attachment as needed. For more information,
refer to Cleaning section.
Whisk Tips and Tricks
• For whipping cream, always use fresh chilledcream.
• For egg whites, whisk fresh, room temperature eggs in a
glass bowl to achieve greater and more stablevolume.
• It is recommended to use the highest speed when
whisking egg whites andcream.
OPERATION
WARNING: To reduce the risk of serious personal
injury, turn unit off and keep away from the
power button before making any adjustments or
removing/installing attachments or accessories.
An accidental start‑up can causeinjury.
Loading ...
Loading ...
Loading ...