Ancona AN1339 User Manual

Loading ...

— 16 —

Maintenance

Make sure the range hood is unplugged or turn OFF

breaker.

Remove lters. Use a screwdriver to pry the light out

along the edge of the lamp.

CAUTION: PUCK MAY BE HOT, PLEASE TAKE

OUT THE PUCK WHEN THE PUCK IS

COMPLETELY COOL!

Slightly pull out the LED light and light connecting

wire, and disconnect the light wire.

Replace with a 10.2 Volt, 2.5 Watt max, LED lights.

Plug in new puck and push back into light panel.

Turn ON breaker and range hood to test for

operation.

Replacing the Light Pucks

IMPORTANT:

ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY AT THE MAIN PANEL BEFORE CARRYING OUT ANY OPERATION

ON THE APPLIANCE.

Figure #8

Cleaning Filters

IMPORTANT: Drain oil from bafes, spacers, lters, oil tunnels, oil containers before oil and residue overow!

• Removeallbafes,spacers,lters,greasetray,andoilcontainersanddiscardoilandresidue.

• Washwithwarmsoapywater.NOTE:Stainlesssteelbafes,spacersandoiltunnelaretoprackdishwashersafe.

• Dry thoroughly before replacing and follow directions for installation in reverse.

• Filters should be cleaned after every 30 hours of use.

• Should lters wear out due to age and prolonged use, replace with a new lter.

Loading ...

Ancona AN1339 24 Inch Stainless Steel Ducted Under Cabinet Insert