Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/50498043-an1339/bgb.png)
— 11 —
Installation
STEP 6
Preparations
NOTE: To avoid damage to your hood, prevent debris from entering the vent opening.
• Determine and mark the centre line on the ceiling or wall where the range hood will be installed.
• Make sure there is proper clearance within the ceiling or wall for exhaust vent.
• Duetotheweightandsizeofthisunit,pleasemakesurethatthesupportsystemorframeworkbeingusedisstableand
secure in the ceiling or wall.
• Put a thick, protective covering over counter top, cooktop or range to protect from damage or dirt.
• Removeanyhazardousobjectsaroundtheareawheninstalling.
CAUTION
If moving the cooking range is necessary to install the hood, turn OFF the power on an electric range at the main
electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.
Figure #2
STEP 7
Preparing the Cabinet
• Measure and cut an opening at the bottom of the cabinet to t the motor
box of the range hood. (See Figure #1A or #1B)
• Measure and cut a hole in the top of cabinet to t the duct tube. (See
Figure #2)
• Note that the hole in the top of the cabinet may not be necessary
depending on venting method chosen. (See Page 10).
STEP 8
Attaching Damper Flap
• Fixthedamperapintothedamperholeontopoftherangehoodmotor
box. (See Figure #3).
Figure #3
Figure #1A Figure #1B
10.6 in. (27 cm)
19.6 in. (50 cm)
10.6 in. (27 cm)
32.6 in. (83 cm)
20.5 in. (52 cm) 33.5 in. (85 cm)
Loading ...
Loading ...
Loading ...