Ancona AN1339 User Manual

Loading ...

— 12 —

Installation

STEP 10

Venting

• Depending on the exterior venting chosen (See Page 10), either exit the ducting through the ceiling or wall.

• Alwaysuserigidtypemetal/aluminumducttube(followingthebuildingcodesinyourarea)tomaximizeairow.

• Makesurethatthebackdraftapscanopentoallowformaximumairow.Connecttheducttubetothevent/damper

and securely seal with duct tape so that it is air tight.

STEP 9

Installing the Hood

• Align range hood to the opening in the bottom of the cabinet and screw in with screws. (See Figure #4 and #5)

• Install the expansion pipe and x it with cable tie (See Figure #6). Please note the expansion pipe and cable tie are not

included in the product.

Figure #6Figure #5

SAFETY WARNING:

Risk of electrical shock. This range hood must be properly grounded. Make sure this is done by a

qualied electrician in accordance with all applicable national and local electrical codes. Before

connecting wires, switch power off at service panel and lock service panel to prevent power from

being switched on accidentally.

Figure #4

Loading ...

Ancona AN1339 24 Inch Stainless Steel Ducted Under Cabinet Insert