1. Home
  2. Hoshizaki
  3. Hoshizaki KMS822MLJ User Manual
  4. Page 27

Hoshizaki KMS822MLJ KMS-822MLJ 23" Serenity Series Cuber Ice Machine

Instruction Manual - Page 27

For KMS822MLJ.

PDF File Manual, 32 pages, Read Online | Download pdf file

KMS822MLJ photo
Loading ...
Loading ...
Loading ...
27
Cleaning
4) Remove the front insulation panel, then remove
cube guide B and cube guide A.
See Fig. 14. Remove the overow cap, overow
pipe, water shield, and drain plug. After the water
tank has drained, replace the drain plug, water
shield, overow pipe, overow cap, cube guide A,
cube guide B, and front insulation panel.
NOTICE! Be careful not to cross thread the
drain plug and overow pipe.
5) To ll the water tank, move the control
switch to the "ICE" position, then replace
the front panel. After 3 min., remove the
front panel, then move the control switch to
the "OFF" position.
6) Remove the front insulation panel, then pour 14 . oz. (414 ml) of Hoshizaki "Scale
Away" into the water tank. Replace the front insulation panel. Turn the cleaning valve to
the left until completely vertical (open).
7) NOTICE! To avoid excessive foaming, wait 1min. before proceeding.
After 1 min., move the control switch to the "WASH" position, then replace the front
panel.
8) After 30 min., remove the front panel, then move the control switch to the "OFF"
position.
9) Remove the front insulation panel, then remove cube guide B and cube guide A.
Remove the overow cap, overow pipe, water shield, and drain plug. After the water
tank has drained, replace the drain plug, water shield, overow pipe, overow cap, cube
guide A, cube guide B, and front insulation panel.
10) In bad or severe water conditions, turn off the power supply, then remove, clean
(cleaning solution = 5 oz. Hoshizaki "Scale Away" per gallon of warm water), rinse,
and replace the cube guides, oat switch, water supply tubes, spray tubes, and spray
guides; turn on the power supply when complete. Otherwise, continue to step 11.
Cleaning Rinse
11) Turn the cleaning valve to the right until completely horizontal (closed). Move the control
switch to the "ICE" position, then replace the front panel. After 3 min., remove the front
panel, then move the control switch to the "OFF" position. Note: The icemaker will not
operate unless the cleaning valve is completely closed.
12) Turn the cleaning valve to the left until completely vertical (open). Move the control
switch to the "WASH" position, then replace the front panel. After 5 min., remove the
front panel, then move the control switch to the "OFF" position.
13) Remove the front insulation panel, then remove cube guide B and cube guide A.
Remove the overow cap, overow pipe, water shield, and drain plug. After the water
tank has drained, replace the drain plug, water shield, overow pipe, overow cap, cube
guide A, cube guide B, and front insulation panel.
Overow Pipe
Cube Guide A
Overow Cap
Water
Shield
Drain
Plug
Cube Guide B
Fig. 14
Loading ...
Loading ...
Loading ...