Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
84
Building in the coffee machine
Danger of injury due to incorrect
operation.
A machine that has not been built in
is not safe and can cause injuries.
Do not operate the coffee machine
unless it has been built in.
Danger of damage due to
incorrect operation.
If the ambient temperature is not
within the permitted range, the
coffee machine cannot function
properly.
The coffee machine may only be
operated within an ambient
temperature range of +16°C to
+38°C.
Maintain the required minimum
installation height of
337/16" (850mm).
Risk of damage and injury from
the coffee machine tipping over.
If the coffee machine is not screwed
to the housing unit, the appliance
may tip forward when the appliance
door is open.
Make sure that a second person fully
secures the coffee machine during
installation.
First screw the top-left screw to the
housing unit.
Risk of damage due to the use of an
electric screwdriver.
If the coffee machine is secured with
an electric screwdriver, e.g., a
cordless screwdriver, the chuck may
damage the appliance door and/or
the interior.
Only use a manual screwdriver to
secure the coffee machine in the
housing unit.
To install the machine, you will need a
TX20 screwdriver.
Useful tip: It is useful to have
somewhere at the height of the niche to
place the coffee machine on. This
makes electrical connection easier.
Connecting the electricity supply
Observe the information under
“Electrical connection”.
Connect the coffee machine to the
electricity supply.
Pushing in and aligning the coffee
machine
Take care not to trap or damage the
electrical connection when pushing
the machine into the niche.
Push the coffee machine all the way
into the niche until you feel a
resistance.
Check the height of the coffee
machine to make sure that it is sitting
centrally in the niche and that it is
level. Align the machine.
Loading ...
Loading ...
Loading ...