Loading ...
Loading ...
Loading ...
BLY
iNSTALL MULCHER PLATE (See Figs. 5 and
6)
Install two atch hooks to mulcher plate using screw.
washer, lock washer, and weld nut as shown.
NOTE" Pre-assemble weld nut to latch hook by inserting
weld nut from the top with hook pointing down.
Tighten hardware securely.
Raise and hold deflector shield in upright position.
Place front of mulcher plate over front of mower deck
opening and slide into place, as shown
Hook front latch into hole on front of mower deck
Hook rear latch into hole on back of mower deck.
I _ CAUTION:Do not remove discharge
_A guard from mower. Raise and hold
U _ guard when attaching mulcher plate
_ and al!ew it to rest on pJate while in
TO CONVERT TO BAGGING OR
DiSCHARGiNG
Simply remove rnulcher plate and store _n a safe oJace.
Your mower is now ready for discharging or installationof
optional grass catcher accessory.
NOTE: It is not necessary to change blades. The mulcher
blades are designed for discharging and bagging also.
HOOK POINTS-
WELD NUT _ DOWN
FROM THE TOP _[_ /
LOCK
WASHER
WELD
NUT
WASHER
/
MULCHER
PLATE
HOOK
_/_ LOCK
WASHER
WASHER
_J"-"-'SCREW
WELD
NUT
FIG. 5
DEFLECTOR
SHIELD
LATCH
HOOKS
FiG. 6
,/CHE CKLiS T
BEFORE YOU OPERATE AND ENJOY YOUR NEW
TRACTOR. WE WISH TO ASSURE THAT YOU RECEIVE
THE BEST PERFORMANCE AND SA TISFACTION FROM
THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST."
,/ All assembly instructions nave been completed.
,/ No remaining loose parts in carton.
,/ Batteryis properly prepared and charged. (Minimum
1 hour at 6 amps).
¢" Seat is adjusted comfortably and tightened securely.
,/ All tires are properly inflated. (For shipping purposes.
the tires were overinflated at the factory).
¢ Be sure mower deck is properly leveled side-to-side/
front-to-rear for best cutting results. (Tires must be
properly inflated for leveling),
€ Check mower and drive belts. Be sure they ar_ routed
properly around pulleys and inside all belt keepers.
,/ Check wiring, See that all connections are still secure
and wires are properly clamped.
¢ Before driving tractor, be sure freewheel control is in
drive position
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLLOWING IMPORTANT
ITEMS:
,/ Engine oil is at proper level.
,/ Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
,/ Become familiar with all controls - their location and
function. Operate them before you start the engine.
J Be sure brake system is in safe operating condition.
v" it is important to purge the transmission before you
operate your new tractor foi" the first time. Follow
proper starting and transmission purging instructions
(See "TO START ENGINE" and "PURGE TRANSMIS-
SION" in Operation section of this manual).
10
Loading ...
Loading ...
Loading ...