Vacmaster VK809PWR Operator’s Manual

Loading ...

NOTE: Once depleted, the cleaning solution can be replaced by a high-quality liquid carpet

cleaning solution that can be purchased from a local retailer. Always use the cleaning solution as

directed by the manufacturer.

5. Snap the cap of cleaning solution tank back into place. Then insert the cleaning solution tank

back into the vacuum base. Insert the end of the cleaning solution tube into the cleaning solution

tank (Fig. 4).

6. Insert the locking end of the hose into the vacuum port on the collection tank and turn clockwise

to lock into place. Connect the threaded connector on the end of the cleaning solution delivery

tube onto the cleaning solution outlet coupling (Fig. 5).

7. Insert the remote-control handle and its cleaning solution outlet coupling (

②

) into the larger

end of the extension wand and its cleaning solution inlet connector (

③

) ensuring a "click" is

KHDUG7KHDLUÀRZUHJXODWLRQRQWKHUHPRWHFRQWUROKDQGOHDOORZV\RXWRPDQXDOO\FKDQJHWKH

amount of vacuum suction (Fig. 6 & 7).

8. Attach the carpet shampoo nozzle to the extension wand and make sure it clicks into place (Fig.

8 & 9).

For best performance, it is recommended to remove the brush holder during carpet cleaning.

Follow steps in Fig. 10. to remove the brush holder.

7RUHLQVWDOOWKHEUXVKKROGHUPDNHVXUHWR¿UVWDOLJQWKHDUURZVRQWKHEUXVKKROGHUDQGWKH

nozzle as shown. Then move the brush holder to the left as indicated by the arrow until you hear a

"click" (Fig. 11).

CAUTION: NEVER PRY OR ROTATE THE SPRAY OUTLETS OF THE CARPET

SHAMPOO NOZZLE AND HANDHELD SHAMPOO NOZZLE WITH A SCREWDRIVER OR ANY

OTHER TOOL (FIG. 12 & 13).

1. Verify that the power cord is disconnected from the outlet (Fig. 1).

7RSUHSDUH\RXUYDFXXPFOHDQHUIRUFDUSHWXSKROVWHU\FOHDQLQJUHPRYHWKHFDUWULGJH¿OWHU

&DUHIXOO\LQVWDOOWKHVXSSOLHGIRDPZHW¿OWHURYHUWKH¿OWHUFDJHPDNLQJVXUHWKH¿OWHUFDJHLV

completely covered (Fig. 2).

4. Remove the cleaning solution tank from the vacuum base. Open the cap of cleaning solution

tank and pour the cleaning solution mixture into the tank. To make the cleaning solution mixture,

mix 1.5 oz. of cleaning solution per 0.5 gallon of water (Fig. 3).

NOTE: A 17 oz. (500ml) bottle of cleaning solution is provided with this vacuum cleaner. Ensure

the cleaning solution and water are mixed at the correct ratio. Water must be at room temperature.

NOTE: ALWAYS DRY VACUUM THE AREA BEING CLEANED BEFORE USING THE

SHAMPOO MODE.

CAUTION: BEFORE YOU USE THIS PRODUCT TO SHAMPOO CLEAN AN AREA,

TEST YOUR WET/DRY SHAMPOO VACUUM AND THE CLEANING SOLUTION ON A SMALL

HIDDEN AREA FOR COLORFASTNESS. IF THE COLOR IS AFFECTED, DO NOT USE.

CAUTION: THE CLEANING SOLUTION CONTAINS A CHEMICAL SOLUTION. AVOID

PROLONGED CONTACT AS SOME INDIVIDUALS MAY EXPERIENCE SKIN AND EYE

IRRITATION. FOR SKIN AND EYE IRRITATION, WASH AFFECTED AREA WITH WATER FOR

5-10 MINUTES. IF IRRITATION PERSISTS, SEEK MEDICAL ATTENTION IMMEDIATELY.

INDIVIDUALS WITH SENSITIVE SKIN SHOULD WEAR RUBBER GLOVES. WASH HANDS

THOROUGHLY AFTER USE. DO NOT INGEST. KEEP OUT OF REACH OF CHILDREN. USER

ASSUMES ALL RISK.

Loading ...

Vacmaster VK809PWR 8 Gallon 5.5 Peak HP Wet/Dry/Upholstery Shampoo Vacuum Cleaner

Operator’s Manual - Page 16