Vevor MD-3010II INSTRUCTION MANUAL

Loading ...

Find an area on the ground outside where there are no metal objects.

Bury few samples at a separation distance of 1-2 feet apart as targets for the testing.

While holding the search coil level to the ground about 1-2 inches above the surface,

slowly move the s earch coil over the area where you placed the samples, sweeping the

search coil in a side-to-side motion.

When a sample is being detected, a tone will be generated.

Slowly lifting up the search coil, the depth indicator on the LCD display increases. This

means that the target is a real one. Return to the original position to read the depth level

of the target.

Note: The indicator reading is for reference only. The exact depth of a target depends on

the projection area on the search coil

4.5 OPERATION TIPS

4.5.1 Objects not on the list

If the highlight indicator jumping from one target icon to another or vice versa while an

object is being detected, the detected object may be an object not in the display list or the

soil is highly mineralized. The latter one can be ruled out by decreasing the sensitivity

level and search again.

4.5.2 False Signal

The detector is extremely sensitive and will find very deeply-duried object. Because of this,

trash-induced signals and other sources of interference might cause signals that seem

confusing. The key to handling these types of signals is to dig for only those targets that

emit a strong, repeatable signal. As you sweep the ground, learn to recognize the

difference between signals that occur at random and signals that are stable and

repeatable.

To reduce false signals when searching in very trashy ground, scan only a small area at a

time using slow, short overlapping sweeps.

4.5.3 Searching Coil Sweeping

Keep the search coil moving at a comfortable rate. TAKE YOUR TIME. If you walk too

fast you can t overlap yours sweeps and you ll miss a lot of ground. Also if you sweep too

fast, you ll lose sensitivity and miss the target.

Keep the search coil parallel to and as close to the ground as practical. This is important

for maximum coverage and depth. If you re hunting on a lawn you can rub the coil right on

the grass.

Loading ...

Vevor MD-3010II Deep Sensitive Metal Detector Gold Treasure Hunter Ground Search