Loading ...
Loading ...
Loading ...
Installation Instructions
LEVELTHE RANGE
[] Install the oven racks in the oven
and position the range where it will be
installed.
I_1 = _ Lower
Leg _ range
level:ra ise'______
range "_
Raise
range
Lower
range
(on some models)
(on some models)
[] Check for levelness by placing a spirit
level or a cup, partially filled with water,
on one of the oven racks. If using a spirit
level, take two readings--with the level
placed diagonally first in one direction
and then the other.
[] Remove the broiler drawer. See the Care
and cleaning of the range section. The
front leveling legs can be adjusted from
the bottom and the rear legs can be
adjusted from the top or the bottom.
Use an open-end or adjustable wrench
to adjust the leveling legs until the range
is level.
[] After the range is level, slide the range
away from the wall so that the Anti-Tip
device can be installed.
[] INSTALLTHE ANTI-TIP DEVICE
AWARNING -
• Range must be secured with an
approved Anti-Tip device.
• Unless properly installed, the range could
be tipped by you or a child standing,
sitting or leaning on an open door.
• After installing the Anti-Tip device, verify
that it is in place by carefully attempting
to tilt the range forward.
• This range has been designed to meet all
recognized industry tip standards for all
normal conditions.
• The use of this device does not preclude
tipping of the range when not properly
installed.
• If the Anti-Tip device supplied with the
range does not fit this application, use the
universal Anti-Tip device WB02K10254.
Mark the wall where the RIGHT EDGE
of the range is to be located. Be sure
to allow for the countertop overhang
if you intend to install the range next
to cabinets.
Slotted head
screw
Anti-Tip !
device I
!
+--...
Wallplate I
I
Marked edge
of range
J
Locate the outside edge of the device
2%" toward the center of the range from
the marked edge of the range.
[] Using the device as a template, mark the
position of the hole for the screw.
37
Loading ...
Loading ...
Loading ...