Loading ...
Loading ...
Loading ...
Symbol Explanation
Screwdriving
Do not touch rotating part.
7 RISK LEVELS
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYM-
BOL
SIGNAL MEANING
DANGER Indicates an imminently haz-
ardous situation, which, if not
avoided, will result in death
or serious injury
.
WARNING Indicates a potentially hazard-
ous situation, which, if not
avoided, could result in death
or serious injury
.
CAUTION Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury
.
CAUTION (Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.
8 INSTALLATION
8.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
W
ARNING
• If the parts are damaged, do not use the machine.
•
If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2.
Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
8.2 INSTALL THE BATTERY PACK
WARNING
• If the battery pack or charger is damaged, replace the
battery pack or the char
ger.
• Stop the machine and wait until the motor stops before
you install or remove the battery pack.
• Read, know, and do the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2.
Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.3 REMOVE THE BATTERY PACK
1. Push and hold the battery release button.
2.
Remove the battery pack from the machine.
8.4 INSTALL THE BIT
2
1. Push forward / reverse switch in "neutral" position to lock
the trigger
.
2. Pull back on the clamp collar and hold in position.
3. Put bit into coupler.
4. Release the clamp collar.
8.5 REMOVE THE BIT
1. Pull back the clamp collar and remove the bit.
7
English
EN
Loading ...
Loading ...
Loading ...