Loading ...
Loading ...
Loading ...
7
Where electrical components are being changed, they shall be fit for the
purpose and to the correct specification. At all times, the manufacturer's
maintenance and service guidelines shall be followed. If in doubt, consult the
manufacturer's technical department for assistance.
Detection of flammable refrigerants: Under no circumstances shall potential
sources of ignition be used in the searching for or detection of refrigerant leaks. A
halide torch (or any other detector using a naked flame) shall not be used.
INSTRUCTIONS
Safety Instructions
1. Electric safety
- Must use independent special socket and socket should be grounding.
- The power plug should be connected to the socket tightly.
- When a power wire or plug is broken or worn, do not use it, and you must go
to the appointed maintenance pot to get it fixed or replaced.
- Please do not insert or pull out plug when there is leakage of natural gas or
other flammable gas.
- Please install a leakage protector to avoid electric shock.
- Please do not turn on and off the power button, which will cause an electric
shock or short circuit.
2
．
Others
- Do not put flammable, explosive, dangerous, and corrosive items in the
refrigerator.
- To keep safe, please do not put items on the top of the refrigerator in case
of unwanted loss.
- Do not spray in the refrigerator using water; also do not put it in wet place
where it can be splashed in case of effecting electric isolation.
- Please do not touch
the
outside pipe in case of scalding.
- Out of power or clean, please pull out the plug. There should be at least 5
minutes before connecting power again in case of compressor damage.
Loading ...
Loading ...
Loading ...