Loading ...
Loading ...
Loading ...
3
regulations
The appliance is to be installed in accordance with the Safety Standard for
Refrigeration Systems, ANSI/ASHRAE 15.
Notice: Any person who is involved with working on or breaking into a refrigerant
circuit should hold a current valid certificate from an
industry-accredited assessment authority, which authorizes their competence to
handle refrigerants safely in accordance with an industry recognized assessment
specification.
Notice: Servicing shall only be performed as recommended by the equipment
manufacturer. Maintenance and repair requiring the assistance of other skilled
personnel shall be carried out under the supervision of the person competent in
the use of flammable refrigerants.
Notice: Component parts shall be replaced with like components so as to minimize
the risk of possible ignition due to incorrect parts.
The appliance is to be installed in accordance with the Safety
WARNING
Do not use means to accelerate the defrosting process or to clean, other than
those recommended by the manufacturer.
The appliance shall be stored in a room without continuously operating ignition
sources/for example: open fames, an operating gas appliance or an operating
electric heater.
Do not pierce or burn.
Be aware that refrigerants may not contain an odour.
Warning: The appliance shall be stored in a well-ventilated area where the
room size corresponds to the room area as specified for operation;
Warning: The appliance shall be stored in a room without continuously operating
open flames (for example an operating gas appliance) and ignition sources (for
example an operating electric heater).
Waring: The appliance shall be stored so as to prevent mechanical damage
from occurring.
Check that cabling will not be subject to wear, corrosion, excessive pressure,
vibration, sharp edges, or any other adverse environmental effects. The check
shall also take into account the effects of aging or continual vibration from sources
Loading ...
Loading ...
Loading ...