Loading ...
Loading ...
Loading ...
44 EN
1.
After finishing work, thoroughly clean the entire device.
2.
Stop the engine and disconnect the spark plug wire before cleaning the housing.
3.
Empty the fuel tank before cleaning.
4.
Without tilting the mower to the side, lay it on the ground so that the front wheels are in the air.
5.
Clean the underside of the mower with a brush and water.
Do not use high-pressure cleaning devices, as high-pressure water can break the paint protection of the housing. Do not use
intensive cleaning and washing agents, e.g. aggressive detergents, they can damage plastics and metals, which may result
in deterioration of the device's safety.
The second way to clean the housing is to use the housing cleaning system.
After connecting the hose to a special quick coupler that is already mounted in the mower housing and unscrew the water,
start the mower. The device is cleaned during the rotation of the knife, on which a strong stream rinses out flushing residues
of grass. (Fig. (Rys.) 15)
MOUNTING THE SIDE DISCHARGE CHUTE
To mount the side discharge chute:
1.
open the side ejector cover 18 (Fig. (Rys.) 2) (To unlock the cover, first turn the axle cover (Fig. (Rys.) 17A, B)),
2.
push in the side discharge chute 20 (Fig. (Rys.) 2) as shown in the Fig. (Rys.) 17C.
3.
rest the side ejection cover on the side discharge chute (Fig. (Rys.) 17D).
GRINDING FUNCTION
Mulching (mulching) is a care procedure involving the fragmentation of cut grass. The mulching system allows it to be left
completely or partially on the soil, where it decomposes and provides nutrients.
The lawn meets the mulching conditions when the grass is no more than 4 cm. The lawn on which mulching will be carried
out must be mowed regularly and quite often - even every few days. During mulching, only young and delicate blades can be
left on the surface, without damaging the lawn, as they break down and do not rot.
To start the grinding function, remove the grass catcher and remove the side ejection cover (if fitted), mount the grass
grinding attachment /plug (Fig. (Rys.) 16) to the rear outlet and close the tailflap.
For mulching to be fully effective, you must buy a milling knife.
SIDE EJECTION FUNCTION
To work with the side ejection:
1. remove the grass basket 7 (Fig. (Rys.) 1) (if fitted), insert the mulching plug into the rear outlet opening
(Fig. (Rys.) 16) and close the flap 23 (Fig. (Rys.) 2).
2. lift the side discharge cover and install the side discharge chute with the catches. Note: to raise the side
discharge cover, it may be necessary to use a lot of force or to open a special lock preventing its
automatic opening (if present on your model). (Fig. (Rys.) 17A-C)
3. Rest the side discharge cover on the side discharge cover (side discharge duct). (Fig. (Rys.) 17D)
MAINTENANCE
HANDLING THE CUTTING KNIFE
Warning:
Disconnect the spark plug wire before checking the cutting knife or blade attachment shaft. If the knife hits an object, stop the
engine, disconnect the spark plug cable and check the mower for damage. Check whether the crankshaft on the power take-
off side or the adapter to which the knife is attached has not been damaged (bent or cracked).
The knife adapter does not provide protection against engine damage when the knife hits objects other than grass, e.g.
stones, branches, molehills.
Check often that the knives are not bent, that they are not excessively worn, and that there are no other damages such as
Loading ...
Loading ...
Loading ...