Loading ...
Loading ...
Loading ...
Aboutthefreshfoodcompartmentshelves, w Hetpeint.cem
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
,Half-Width Shelves
[]
E_Tilt Up
One end of the shelf rests on a molded
side-wall SUl)port; a bracket on the other
end hooks into a track on the rear
cabinet wall.
Toremove, lift the shelf up at fl'ont, then
off the sui)i)ort and out of the track.
Toreplace, select desired shelf height.
With shelf fl'ont raised slightl B hook
the bracket's top lug into the track,
then lower the shelf onto the sui)port.
NOTE:Theshelf to theright ofthetrackis
designedtohookintothenght-hands/ot,
theshelf to theleft isdesignedtohook
into theleft-handdot.
/
Full-Width Shelves
Some models have a steel wire sliding
shelf, a stationary tempered glass shelf or
two steel wire stationary shelves. These
shelves can be moved to another place
in the fl'esh fl)od compartment.
The fifll-width sliding shelf has stop-locks.
_]_en placed correctly on the shelf
supports, the shelf will stop befin'e coming
completely out of the refrigerator and will
not tilt when vou place fi)od on it or
rein ove fl)od from it.
To remove the full-width shelves, lift the
rear of the shelf and pull forward.
Toremove a furl-width shelf when the fresh
food compartment door cannot be opened
fully, lift the rear of the shelf, pull
fl)rward and down, tilt the shelf and
take it out.
II
Spillproof Shelves (onsomemodels)
Spillproof shelves have special edges
to hel I) prevent spills from drii)ping
to lower shelves. To remove or replace
the shelves, see the above instructions.
Loading ...
Loading ...
Loading ...