Loading ...
Loading ...
Loading ...
Installation Instructions
El INSTALLING THE WATER LINE (CONT.)
[] PLUG IN THE REFRIGERATOR
__rran,*e the coil of tubing so that it does not xibrate
a
against the back of the refrigerator or against the
wall. Push the refrigerator back to the wall.
[] START THE ICEMAKER
On power switch models, set the icemaker power
switch to the I (011)position. On feeler arm models,
move the feeler arm to the ON (down) position. The
icemaker will not begin to operate until it reaches
its operating temperature of 15°F (-9°C) or below.
It will then begin operation automatically:
Powe
Power switch model
in
theON(down)position
Feelerarmmodel
NOTE: In lower water pressure conditions, the
water xalxe may turn on up to 3 times to delixer
enouoh water to the icemaker.
B REVERSING THE DOOR SWING
IMPORTANT NOTES
\,_l_en re\'e_'sing the door swing:
•Read the inst_ uctions all the way through befl)re
starting.
• Handle parts carefldly to awfid scratching paint.
• Set screws down by their related parts to avoid using
them in the wrong places.
• Provide a non-scratching work sm'tace fin.
the doors.
IMPORTANT: Once wm begin, do not move the
cabinet until doo>swing reversal is completed.
These instructions are fi)r changing the hinges fl'om
the right side to the left side--if wm ever want to change
the hinges back to the right side, follow these same
inst_ uctions and reverse all references to left and right.
TOOLS REQUIRED
Phillipsscrewdriver
5/16" hex-head
socketdriver
Puttyknifeor thin-blade
screwdriver
Maskingtape
T20 or T25 Torxdriver,
(needed for some
models)
5/16" open-end
wrench
16
Loading ...
Loading ...
Loading ...