Loading ...
Loading ...
Loading ...
Installation Instructions
[] CONNECT THE TUBING
TO THE REFRIGERATOR
NOTES:
•Before making tile connection to tile refrigerator,
be sure tile refrigerator power cord is not I)lugged,,
into tile wall outlet,
• We recommend installing a water filter if wmr
water supply has sand or particles that could clog
the screen of the refi'igerator's water wdve. Install
it in tile water line near tile refl'igerator. If using
an approved plastic refl'igerator robing kit, you
will need an additional robe (_\)X08X10002) to
connect tile filter. Do not cut plastic tube to
install filter.
Remo_,e tile access co_,er,
Remove tile plastic flexible cap from tile water
xalxe (refl'igerator cmmection).
Place tile compression nut and teHule (sleeve)
onto tile end of tile robing as shown. On an
approved plastic refrigerator tubing kit, tile nuts
are ah'eadv assembled to tile tubing.
Insert the end of the tubing into the water wdve
connection as tar as possible. While holding the
tubing, tighten the fitting.
For plastic tubing fl'om an approved refrigerator
tubing kit, insert the molded end of the robing into
the shutoff wdve and tighten compression nut tmtil
it is hand tight, then tighten one additional turn
with a wrench. Overtightening may cause leaks.
[] CONNECT THE TUBING TO THE
REFRIGERATOR (CONT.)
Fasten tile tubing into tile clamp provided to
hold it in a vertical position. You may need to
P_T open tile clamp.
1/4" Copper -- -- TubingClamp
Tubing
Refrigerator
Connection
Reattach the access co_,ei;
1/4"Compression
Nut
(sleeve)
Approved
PlasticTubing
[] TURN THE WATER ON AT THE
SHUTOFF VALVE
Tighten am cmmections that leak.
15
Loading ...
Loading ...
Loading ...