Loading ...
Loading ...
Loading ...
32
Check if the MaxiFlash is powered on.
In case of wireless connection, check if the network is configured
correctly, or if the right device has been paired.
If during the diagnosis process, communication is suddenly
interrupted due to the loss of signal, check if there are any objects
that causes signal interruption.
Check if the MaxiFlash is properly positioned. It is recommended to
put the MaxiFlash with the front side up.
Try standing closer to the MaxiFlash to obtain more stable signals,
and faster communication speed. In case of wired connection, check
the cable connection between the tablet and the MaxiFlash.
Check if the green LED on the MaxiFlash is illuminated for BT or
USB.
Check if the Error LED on the MaxiFlash is on, this may indicate
there is a communication error between the devices, in this case try
re-establishing the connection again; if this does not work, there may
be a hardware problem with the device, in this case contact Autel or
local distributor for technical support.
B. If the MaxiFlash is unable to establish a communication link, a prompt
message displays with check instructions. The following conditions are
the possible causes for this massage to display:
The MaxiFlash is unable to establish a communication link with the
vehicle.
You’ve selected a system for testing that the vehicle is not equipped
with.
There is a loose connection.
There is a blown vehicle fuse.
There is a wiring fault on the vehicle, or the data cable or adapter.
There is a circuit fault in the data cable or adapter.
Incorrect vehicle identification was entered.
Loading ...
Loading ...
Loading ...