Loading ...
Loading ...
Loading ...
30
To connect the cigarette lighter
1. Plug the DC power connector of the cigarette lighter into the DC
power supply input port on the device.
2. Connect the male connector of the cigarette lighter into the vehicle’s
cigarette lighter receptacle.
NOTE
After the MaxiFlash is successfully connected to the vehicle, the Power LED
on the device illuminates, and a brief beep sound will be heard.
VCI Connection
After the MaxiFlash is properly connected to the vehicle, the Power LED on
the MaxiFlash illuminates solid green, and is ready to establish
communication with the tablet.
The Wireless Diagnostic Interface supports two communication methods with
the tablet: BT and USB.
Pairing Up via BT
Among all methods, BT pairing is recommended as the first choice for the
communication between the tablet and the MaxiFlash. The working range for
BT communication is about 210 feet (70 m); this means you can perform key
programming and vehicle diagnosis freely around the workshop with greater
convenience.
If you use more than one MaxiFlash to connect to the test vehicles when
customers are many, you can perform key programming and vehicle
diagnosis on various vehicles conveniently, by pairing the tablet separately
to each of the MaxiFlash connected to the different test vehicles, via BT,
without the need to repeat the plugging and unplugging procedure, which is
unavoidable through traditional wired connection, thus saves you more time
and provides more efficiency.
To pair up the tablet with the MaxiFlash via BT
1. If not already done, power up the tablet.
2. Select the VCI Manager application from the MaxiIM Job Menu.
3. When the VCI Manager application is opened, the device
Loading ...
Loading ...
Loading ...