Loading ...
Loading ...
Loading ...
Installing the Main Unit
Method 1 • Installing the Stand so that the DVD Player Lays Flat.
Preparation
= Disconnect the AC power cord from the AC outlet before installing the main unit.
= Connect the cables before installation.
Method 2 • Installing the Stand so that the DVD Player Stands up.
Preparation
• Disconnect the AC power cord from the AC outlet before installing the main unit.
• Connect the cables before installation.
0 00 0
I 1
0 00 0
I 1
1 Turn the stand counter-clockwise and pull it apart.
• The DVD Player and stand are separated.
2 Hold the DVD Player and stand as shown by the figure and turn
the right side of the stand upward so that it is slightly slanted.
3 Insert the 2 stand anchors into the holes on the back of the
DVD Player.
4 Turn the right side of the stand clockwise to fix it to the back of the
DVD Player.
1 Turn the stand in the direction of the arrow and pull it apart.
• The DVD player and stand are separated.
2 Lift the right side of the stand so that it is slightly slanted.
3 Insert the 2 stand anchors into the holes on the bottom of the
DVD Player.
4 Turn the right side of the standclockwiseto fix it to the bottomof the
DVDPlayer.
• Be careful not to scratch the surface the DVD Player when installing
the stand.
• Do not turn the DVDPlayerleftor rightas it mayseparateit from thestand.
Arranging the Cables
Use the cable tie to keep the cables together.
14 15
Loading ...
Loading ...
Loading ...