Loading ...
READ AND FOLLOW SAFETY INSTRUCTIONS!
N,NGi
o,oT,oNI
This is the safety alert symbol. When you see this sym-
bol on your tank or in this manual, look for one of the fol-
lowing signal words and be alert to the potential for
personal injury:
DANGER warns about hazards that will cause serious per-
sonal injury, death or major property damage if ignored.
WARNING warns about hazards that will or can cause se-
rious personal injury, death or major property damage if ig-
nored.
CAUTION warns about hazards that will or can cause
minor personal injury or property damage if ignored.
The label NOTICE indicates special instructions which are
important but not related to hazards.
Carefully read and follow all safety instructions in
this manual and on tank.
Keep safety labels in good condition.
Replace missing or damaged safety labels.
RULES FOR SAFE INSTALLATION AND OPERATION
1. Read these Rules and the Instructions carefully. Failure
to follow them could cause serious bodily injury and/or
property damage.
&WARNING These water storage tanks are designed for
Hazardous operation on cold well water systems lira-
pressure ited to a maximum working pressure of 100
pounds per square inch (PSI). If your water system can ex-
ceed 100 P.S.I., install a Sears No. 27220 relief valve on the
system. Failure to follow these instructions can cause tank
blow-up and result in serious injury.
NOTICE: Mthough No. 27220 Relief Valve is set to open
at 75 PSI, for your safety Captive Air@ Tanks are designed
and rated to operate at up to 100 PSI.
2. Be sure installation meets all local plumbing, pump,
electrical and well codes.
3. Always test water from well for purity before using. Call
your local health department for testing procedure.
4. Before installing or servicing your pump, BE SURE
pump power source is disconnected.
Loading ...
Loading ...
Loading ...