Loading ...
Loading ...
Loading ...
10
Press this button to cycle through the Auto fan mode and 3 fan speeds (Low,
Medium, High)
FAN
SWING
TURBO
Auto
Note:
● Under AUTO fan mode, the air conditioner will select the proper fan speed
automatically.
● X-FAN Function：Hold the fan speed button for 2 seconds in COOL or DRY
mode. The icon will be displayed. Under this mode the indoor fan will
continue operating for a few minutes after powering off in order to dry the
indoor unit. X-FAN is not available in AUTO, FAN or HEAT modes. This
function will help to dry the moisture on the evaporator to prevent mold.
To shut the X-FAN off after powering the unit off, hold the fan speed button
for 2 seconds.
Press this button to cycle through the following air flow directions:
no display
(horizontal louvers
stops at current position)
When selecting , the horizontal louvers will automatically swing up & down
across the maximum range. .
When selecting " ", the unit will blow air at a fixed position.
The horizontal louvers will not move.
When selecting " ", the unit will blow air across a set range.
The louvers will automatically swing up & down across this range.
To manually set a fixed air direction, press and hold the " button for 2 seconds
until it reaches your desired angle, then release the button. The louvers will not
move from this position.
Under cool or heat modes, press this button to enter quick cool or quick heat
mode. The icon will display on the remote control. Press the button again
to exit the turbo function and the icon will disappear.
Loading ...
Loading ...
Loading ...