Loading ...
Loading ...
Loading ...
09
Function Icons Description
Press this button to turn on the unit. Press this button again to turn off the unit.
Press this button to cycle through the following modes:
Note: After starting up the heat mode, the indoor unit will delay 1~5 minutes
before it starts blowing air. The actual delay time will depend on the current
indoor temperature.
MODE
● Once the unit is powered on the air conditioner will give out a sound and the
power indicator will light up. After that you can operate the air conditioner
by using remote control.
● When pressing a button on the remote control, the signal icon on the remote
control will blink once and the air conditioner will emit a single beep sound, which
means the signal has been sent to the air conditioner. The remote control will
display the active function icons.
● While powered off the set temperature and clock icons will be displayed. If the
timer or light functions are set, the corresponding icons will be also displayed on
the remote control.
AUTO COOL DRY FAN
HEAT
Auto mode: The air conditioner will adjust the fan speed automatically to maintain
the set temperature. The set temperature can't be adjusted. Press "FAN" button
can adjust fan speed.
Cool mode: The air conditioner will operate under standard cooling mode. The set
temperature and fan speed can be adjusted.
Dry mode: The air conditioner will run on low speed for dehumidification. The fan
speed cannot be adjusted.
Fan mode: The air conditioner will not produce cool or warm air, only blow air from
the current room temperature. The fan speed can be adjusted.
Heat mode: The air conditioner operates under heat mode instead of cooling. The
set temperature and fan speed can be adjusted.
Loading ...
Loading ...
Loading ...