Loading ...
Loading ...
Loading ...
5
Using the appliance
The oil-free can prepare a large range of ingredients. The recipe booklet included helps
you get to know the appliance.
Hot air frying
1. The power cord is plugged into the socket.
2. Carefully pull the pan out of the Hot-air fryer (Fig.3)
3. Put the ingredients on the shelf. (Fig.5)
4. Slide the pan back into the Hot-air fryer (Fig 6)
Noting to carefully align with the guides in the body of the fryer.
Never use the pan without the basket in it.
Caution: Do not touch the pan during and sometime after use, as it gets very hot.
Only hold the pan by the handle.
5.Determine the required preparation time for the ingredient (see section 'Settings' in
this chapter).
6. To switch on the appliance, turn the timer knob to the required preparation time (Fig.7)
7.Turn the temperature control knob to the required temperature. See section 'Settings'
in this chapter to determine the right temperature (Fig.8).
Add 3 minutes to the preparation time when the appliance is cold.
Note: If you want, you can also let the appliance preheat without any ingredients
inside. In that case, turn the timer knob to more than 3 minutes and wait until the
heating-up light goes out (after approx. 3 minutes). Then fill the basket and turn
the timer knob to the required preparation time.
a. The timer starts counting down the set preparation time.
b. During the hot air frying process, the working light comes on and goes out from time
to time. This indicates that the heating element is switched on and off to maintain the
set temperature.
c. Excess oil from the ingredients is collected on the bottom of the pan.
8.Some ingredients require shaking halfway through the preparation time (see section
“Settings” in this chapter). To shake the ingredients, pull the pan out of the appliance by
the handle and shake it. Then slide the pan back into the I fryer.
Tip: If you set the timer to half the preparation time, you hear the timer bell when you
have to shake the ingredients. However, this means that you have to set the timer again
to the remaining preparation time after shaking.
9. When you hear the timer bell, the set preparation time has elapsed. Pull the pan out of
the appliance and place it on the trial framework.
Note: You can also switch off the appliance manually. To do this, turn the time control
knob to 0.
10. Check if the ingredients are ready.
If the ingredients are not ready yet, simply slide the pan back into the appliance and set
the timer to a few extra minutes.
11. To remove ingredients (e.g. fries), pull the pan out of the Hot-air fryer and place it on
trial framework.
Do not turn the basket upside down with the pan still attached to it, as any excess
oil that has collected on the bottom of the pan will leak onto the ingredients.
The pan and the ingredients are hot and hot fryer. Depending on the type of the
ingredients in the I fryer, steam may escape from the pan.
Loading ...
Loading ...
Loading ...