Samsung AR18JVSSAWKNED User Manual

Loading ...

Installing and connecting the drain hose of the indoor unit

The drain hose must NOT

slant upwards.

The end of the drain hose

must NOT be placed under

water.

Keep a clearance of at least

5cm between the end of the

drain hose and the ground.

When installing the drain hose for the indoor unit, check if condensation draining is adequate.

When passing the drain hose through the 65 mm hole drilled in the wall, check the followings:

Drain hose installation

1. If necessary, connect the 2 meter extension drain hose to the drain hose.

2. If you use the extension drain hose, insulate the inside of the extension drain hose with a shield.

3. Fit the drain hose into 1 of 2 drain hose holes, then x the end of the drain hose tightly with a clamp.

4. When extending the Drain Hose, hold the end of Drain Hose and Extended Hose,

rotate and insert the drain hose into Extended hose for

40~45 mm. Make sure the

two hoses are rmly connected, there is no water leakage.

5. Connect the Drain Hose after using Foam Insulation to wrap the Extended Hose. Then, Use vinyl tape to wrap the

each side of connection by 20 mm .

•Ifyoudonotusetheotherdrainhosehole,

block it with a rubber stopper.

Drain hose hole

Wall

Indoor unit

Drain hose

The drain hose must not

be bent.

5cm

less

Do not place the end of the

drain hose in a hollow.

Ditch

After completing the

installation of the drain

hose, pour water into

the drain pan to check

whether the hose is well

drained.

•

Don’t tie drain hose to the assembly pipe which may lead to water leakage.

•Ifthediameteroftheconnectionhoseissmallerthantheproduct'sdrainhose,waterleakagemayoccur.

2) Incorrect connection

Pipe

Drain hose

1) Correct connection

Pipe

Drain hose

English-46

AR5000 ED CO_IB&IM_DB68-05069A_EN.indd 46 2015/3/20 16:15:04

Loading ...

Samsung AR18JVSSAWKNED AR5500 Wall-mount with 38% Fast Cooling, 18,000 Btu/hr

User Manual - Page 46