Loading ...
Loading ...
Loading ...
7
The All-STAR 2.0 has a powerful built-in wireless speakers so you can
play your music while riding.
PAIRING THE SPEAKER
1) Turn on your All-STAR 2.0 and the speakers will “Ping” to announce
that it’s waiting for a Bluetooth
®
connection. This will indicate your
All-STAR 2.0 speaker is now in pairing mode.
2) Place the All-STAR 2.0 and the Bluetooth
®
device to which you
would like to pair it within the operating distance. We recommend
keeping the two devices no further than 3 feet apart during pairing.
3) Ensure Bluetooth
®
is enabled on your phone or music device. Refer
to manufacturer’s instructions for how to enable Bluetooth
®
on your
device.
4) Once you have activated Bluetooth
®
on your device, select the
option “DSA-STR2” from the list of available Bluetooth
®
devices.
5) If required, enter the PIN code "000000" and confirm the entry.
6) The All-STAR 2.0 will say “Paired” when successfully paired.
7) Please note, pairing mode on the Hover-1 will last for two minutes.
If no devices are paired after two minutes, the All-STAR 2.0 speaker
will automatically return to standby mode.
8) If pairing is unsuccessful, turn off the All-STAR 2.0 first and re-pair
following the aforementioned steps.
9) If your smart phone is out of range, or the battery is low on your
All-STAR 2.0, your speaker may disconnect from your smart device,
and the All-STAR 2.0 will say “Disconnected.” To reconnect, follow the
aforementioned steps, or recharge your scooter.
NOTE: Once you have paired the All-STAR 2.0 speaker with a device,
the speaker will remember this device and will pair automatically
when the device’s Bluetooth
®
is activated and in range. You do not
need to re-pair any previously connected devices.
Your scooter can pair up to two multi-point devices. You can
reconnect a previously paired device without going through the
pairing or PIN process on up to two devices.
LISTENING TO MUSIC
Once the All-STAR 2.0 Bluetooth speaker is paired to your device, you
can stream music wirelessly through it. Only one speaker will play
music as the other speaker is strictly for safety alerts from your Hover-1.
Select the track you wish to listen to on your device to listen via the
speaker. All volume and track controls will be made using your music
device. Should you encounter any problems while streaming, please
refer to your device’s user manual.
BLUETOOTH SPEAKER
Loading ...
Loading ...
Loading ...