Loading ...
Loading ...
Loading ...
While riding your ALL-STAR 2.0, if there is a system error or improper
operation performed, the ALL-STAR 2.0 will prompt the user in a
variety
of ways.
You will notice the Running Indicator Light will turn RED and you will
hear a beep sound alerting you to take precaution and cease
operation, which may make the device stop suddenly.
The following are common occurrences where you will hear the
Safety Alerts. These notices should not be ignored, but appropriate
action should be taken to correct any illegal operation, failure or
errors.
• Unsafe riding surfaces (uneven, too steep, unsafe, etc.)
• When you step on the ALL-STAR 2.0, if the platform is tilted more
than 10 degrees forward or backward.
• Battery voltage is too low.
• The ALL-STAR 2.0 is still charging.
• During operation, the platform self initiates to tilt due to excess
speed.
• Overheating, or motor temperature is too high.
• The ALL-STAR 2.0 has been rocking back and forth for over 30
seconds.
• If the system enters protection mode, the alarm indicator will light
up and the board will vibrate. This typically occurs when the battery
is about to run out of power.
• If the platform is tilted forward or backward more than 10 degrees,
your ALL-STAR 2.0 will power off and stop suddenly, possibly causing
the rider to lose balance or fall off.
• If any or both tires are blocked, the ALL-STAR 2.0 will alert you with
the flashing lights after 10 seconds.
SAFETY ALERTS
17
Loading ...
Loading ...
Loading ...