Loading ...
Loading ...
Loading ...
ELECTRICAL CONNECTION
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect electrical power at the circuit
breaker box or fuse box before installing
the appliance.
Provide appropriate ground for the
appliance.
Use copper conductors only.
Failure to follow these instructions could
result in serious injury or death.
This unit is manufactured for a polarized, grounded 120
volt/60 Hz, 16 amp system.
Electric power consumption is about 300 W for 30″ and 36″,
1200W for 48″.
The minimum of 102 VAC is required for proper operation
of gas ignition systems.
The circuit must be grounded and properly polarized.
The unit is equipped with a SJT power cord and a NEMA 5-
15P plug. In case of replacement, the power cord shall be
replaced with one of the same type, size and length.
WARNING
Electrical grounding
This appliance is equipped with a three-
prong plug for your protection against
shock hazard and should be plugged
directly into a properly grounded socket. Do
not cut or remove the grounding prong from
this plug.
CAUTION
Label all wires prior to disconnecting when
servicing controls. Wiring errors can cause
improper and dangerous operation.
Verify proper operation after servicing.
17
Loading ...
Loading ...
Loading ...