Loading ...
Loading ...
Loading ...
Page 8 of 13
Attaching the steam head
● Slide the bottom end of main body into
the steam head M until Mop head Swivel
4 clicks into place
● The steam head M can be removed from the
Main body by pressing the Lock Button
on the Main body
Attaching a cleaning pad
⚫ Because of barb design at the bottom of steam head M, just place
a micro-fiber cleaning pad K to steam head, they can bond hard.
⚫ Place the front of your shoe onto the cleaning pad removal tab
and press down firmly.
Attaching Carpet Gilder
⚫ Press the micro-fiber cleaning pad K with main body to
Carpet gilder N by vertical pressure,until it into place.
⚫ Place the front of your shoe onto the cleaning pad removal tab
and press down firmly, carpet gilder will remove from steam head.
OPERATION
1. Filling the water tank
Method one:
Open the water tank cap 11 by counterclockwise
rotation, fill 300ML water use Measuring cup,
and then clockwise rotation to close water tank cap 11.
Method two:
Remove the water tank from main body, open the
water tank cap 11 by counterclockwise rotation, fill
the water tank from water faucet., and then clockwise
rotation to close water tank cap 11.
Install the water tank 13 to main body until it clicks into place.
2. Open the cap of Detergent Tank 14 and add the detergent into the tank if you need detergent
during cleaning.
3. Plug in the appliance to a grounded outlet.
4. When switch the appliance on, the indicator lights will turn red at the each side of water tank,
it indicate preheating. If the lights does not illuminate, please check the "troubleshooting"
section for more details.
5. It will takes approximately 20 seconds for preheating. Once the steam mop is ready to use, the
water tank will glow blue, the mop will emit the steam automatically.
Loading ...
Loading ...
Loading ...