Loading ...
Loading ...
Loading ...
Page 11 of 13
CLEANING AND MAINTENANCE
BE SURE THAT THE UNIT IS DISCONNECTED FROM THE POWER OUTLET WHEN
PERFORMING CLEANING
Drain the remaining water in the tank and clean the tank after every use.
Please use detergent to clean the accessories (Jet Nozzle and Round Brush) when they are dirty
then wash with cleaning water and air dry
How to decalcify the Water Tank interior
To clean calcium deposits that build up inside the Water Tank, add one or two tablespoons of
white vinegar to a full Water Tank close the Water Tank Cap and then shake the contents. DO
NOT TURN THE STEAMER ON.
Cleaning procedure to remove lime scale
If your steam mop begins to produce steam more slowly than usual or stops producing steam , you
may need to remove lime scale. Lime scale can develop over time on the metal parts and greatly
affect mop performance.
It is necessary to remove lime scale on regular basis every 25-50 times you use a full tank of water
or at least once a month, especially in areas with hard water.
The frequency of lime scale removal depends upon the hardness of your tap water and how often
you use the steam mop.
By using cleaning solution
1. Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.
2. Secure and position the unit to ensure steam released is aimed away from the floor or
surrounding objects and surface. Plug the unit in , turn the unit ON by pressing the power switch,
and allow the unit to produce steam until the vinegar/water solution is used up.
3. Repeat the above procedure as many times as necessary until a normal steam flow rate is
achieved.
4. Fill the water tank with fresh water and rinse out.
5. Fill the water tank with fresh water, attach to the unit and release steam through the system until
the water tank is empty.
WARNING
Don't leave the steamer unattended during the lime scale removal process and/or while in
use
NOTICE:
Perform a test cleaning on a suitable isolated area after each lime scale removal to ensure that
there is no debris left in the system.
Loading ...
Loading ...