Loading ...
Loading ...
Loading ...
803341 - Tap Installation Instructions - 02.17 - v2.02 Page 13 of 20
5.1
5 - Celsius All-In-One Tap
Installation
464
Clearance
Min 300mm335mm
Cut a 50mm hole in the bench / sink top. Note:
make sure the tap location will allow the nozzle
to drain into the sink
5.2
BENCH TOP
Ø 50mm
Special Tools Required:
In addition to normal tools, the following will be
required:
•
50mm diameter sheet metal hole punch for
sink tops. (Not supplied)
•
50mm diameter hole saw for timber bench
tops. (Not supplied)
•
54mm AF tube spanner or wrench (Not
supplied) for fixing tap assembly.
5.3
•
Pass all the hoses, tubes and USB lead through
the 50mm hole.
•
Ensure the black rubber seal is correctly
positioned to give a water tight seal
•
Secure the rubber & steel washers and large nut
from inside the cupboard space, as shown.
Loading ...
Loading ...
Loading ...