Loading ...
Loading ...
Loading ...
-15-
Controls and Operation
TIME
(Available when any source is active.)
Enter Menu mode by depressing MENU
button 6 for over a second. Rotate the
SOURCE knob 7 to access TIME mode.
Press the OK button 7 to enter the clock
mode, which begins with the choice of
12HR or 24HR setting.
- 12HR or 24HR Setting – Rotate the
SOURCE knob 7 to go back and forth
between the choices of 12HR or 24HR.
When the desired setting is shown,
press OK to choose the desired setting
and proceed to the hour setting
- Hour Setting – Rotate the SOURCE
knob 7 to change the flashing hour
value. When the desired hour is shown,
press OK button 7 to choose it and
proceed to the minute setting.
- Minute Setting – Rotate the SOURCE
knob 7 to change the flashing minute
value. When the desired setting is
shown, press OK button 7 to choose it
and go back to the top level of the menu.
FM MONO
(Available only when FM is the active source.)
Enter Menu mode by depressing MENU
button 6 for over a second. Rotate the
SOURCE knob 7 to access MONO mode.
Press the OK button 7 to enter this FM-
only menu option, which allows the FM
reception to be in mono (only), which
may be desirable when reception
conditions make it difficult for the radio
to steadily receive a stereo signal.
Rotate the SOURCE knob 7 to switch
between the flashing choices of ON of
OFF. When the desired setting is shown,
press OK to choose it and go back to
the top level of the menu.
CALL
(Available only when Bluetooth is the
active source.)
Enter Menu mode by depressing MENU
button 6 for over a second. Rotate the
SOURCE knob 7 to access CALL mode.
Press the OK button 7 to enter this
Bluetooth-only menu option, which
allows the GPB18V-2C to become a
jobsite speakerphone.
Rotate the SOURCE knob 7 to switch
between the flashing choices of “YES”
or “NO”. When the desired setting is
shown, press OK button 7 to choose it
and go back to the top level of the
menu. See important details about CALL
mode below.
Important details about CALL mode:
• The CALL option is only available for
the Bluetooth source. It cannot be
used when either the radio or the
AUX source is active.
• When the CALL option is set to NO,
no calls can be received or “patched
in” on the GPB18V-2C
• When the CALL option is set to YES,
calls can be answered or “patched
in” on the GPB18V-2C.
• Be aware that if the CALL option is
YES and if you are within about 100
feet from the GPB18V-2C, it is
possible that someone else can
answer incoming phone calls or
“patch-in” those calls to the
GPB18V-2C.
TWS [True Wireless Stereo]
(Available only when Bluetooth is the
active source.)
Enter Menu mode by depressing MENU
button 6 for over a second. Rotate
SOURCE knob 7 to scroll to "TWS".
Press the OK button 7 to enter this
Bluetooth-only menu option, which
allows the GPB18V-2C to become paired
with another GPB18V-2C, with one unit
functioning as the left channel and the
other unit as the right channel.
Rotate the SOURCE knob 7 to switch
between the flashing choices of TWSL
(TWS Left), TWSR (TWS Right) or OFF.
When the desired setting is shown,
press OK button 7 to choose it.
Important details about TWS mode:
• The TWS option is only available for
the Bluetooth source. It cannot be
used when either the radio or the
AUX source is active.
• This feature works only with two
GPB18C-2C units.
• This feature must also be activated
with the second unit to the setting
that is the opposite of the first unit’s
setting, TWSL or TWSR.
To exit the TWS mode, the TWS setting
in the MENU must be changed to OFF.
Loading ...
Loading ...
Loading ...